Soon after we released A13-LCD7 customers start asking us: can you make something smaller, we have handheld application in mind and 7″ LCD is just too big, this is how we made A13-LCD43 4.3″ LCD 480×272 pixels, then other customers start asking: I have application where bigger display is necessary, can you make 10″ LCD module?
So we were looking around and finally found RGB24bit parallel interface LCD with 10.1″ diagonal and 1024×600 pixels resolution.
We got today two samples and will try to see if A13 can work with such resolution as this is double than 800×480 pixels of the A13-LCD7.
This 10″ LCD will allow building of laptop/tablets with A13-OLinuXino, LCDs with same size and resolution are used in Acer Eye netbook PCs and the resolution is good for normal work.
If everything works well we will have A1X-LCD10 in stock in April, the preliminary price we target is EUR 75 for the LCD module with the driver circuit ready to plug in A13-OLinuXino, resistive touchscreen will be sold separately.
Very interesting. Looking forward to see the results.
What is the model no? Do you have any datasheets for it?
this is custom made LCD, with same pin-out as our A13-LCD7 so we can use same driver board for both
hi, it is nice LCD, but i has some question.
1/ same your say about A13 chip has maximum resolution 800×600 ( follow your test ) now this LCD has 1024×600 resotution, how can you solve it? ( used low frame rate @60 per Second to @30 per second?
800×600 is the maximum we can achieve with VGA, I wrote that now we will *try* to see if A13 can achieve resolution 1024×600 if not we will try A10S
i like A10S, i waiting Olimex make A10s with full 32 bit, 1Gbyte DDR3, it is faster current A10s version, everybody are waitting good news from Olimex!
You can already buy Parallel 10.1 1024*600 on the market, see for example the HannStar HSD101PFW5-B10-0220.
Any update on the 10.1 inch display? When do you plan to sell it?
in 2 weeks we have to receive the LCDs and will offer them
Looking forward to this, nice.