MOD-RS485-ISO COMPLETED


Image

We just complete MOD-RS485-ISO galvanically isolated RS485 to UEXT module which allow all our development boards with UEXT connector to interface RS485 products, our old MOD-RS485 module was without galvanic insulation but as RS485 is used a lot in industrial and noisy environment we decided to release isolated version too.

The preliminary schematic of MOD-RD485-ISO is here:

Image

note that after the prototyping this schematic may have changes, we add PIC16F1503 microcontroller to handle the UEXT communication and addressing by I2C.

Just learned today that Ken Segler is working on RS485 project with DuinoMite and implements MODBUS protocol by DuinoMite and MOD-RS485, for this purpose he implements 9 bit UART configuration.

For those who have not spoted yet PIC16F1503 is cool small new microcontroller from Microchip which cost USD 0.80 in small quatities!

It have 2K Flash and 12 GPIOs, 4 PWMs, ADC, DAC (5bit) and configurable logic for the ports!

We decided to put this PIC to all our new UEXT boards just to handle the I2C addressing and to allow many different modules to connect to UEXT bus without interferences.

PIC-H1503 is small header board we designed to may play with PIC16F1503 and USB-PWR is small module which powers BreadBoard bus through USB with selectable 3.3V-5V

Image

both USB-PWR and PIC-H1503 board will be ready for sale in March.

USB-PWR will cost EUR 1.95

PIC-H1503 will cost EUR 1.95

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: