A20-ENC, OLIMEXINO-85-KIT and OLIMEXINO-85-ASM are in stock!


Image

A20-ENC the plastic enclosure for A20-OLinuXino-MICRO is now in stock, the pictures on the web page show how to be assembled.

OLIMEXINO-85-KIT and OLIMEXINO-85-ASM are also in stock now. We still work on the assembly instruction and it will be ready and uploaded by the end of the day.

With OLIMEXINO-85-KIT we offer for very first time development board in KIT form. This is something new for us, it brings also new experience for the customer: to DO-IT-YOURSELF and to have the pleasure to see how something you build yourself start working.

I still do remember how proud I was when I was 12 and build my first radio and it worked! I hope you will have the same pleasant experience building your first Arduino with OLIMEXINO-85-KIT.

For the moment we use Digispark VID/PID and Arduino modified IDE, as this is the only out of the box working solution for ATTiny85. We have our own USB VID/PID and we are going to replace the Digispark one as soon as we figure out how to do this. If someone want to help on this we will have nice present for the efforts she/he will do🙂

7 Comments (+add yours?)

  1. oggstreamer
    Oct 27, 2013 @ 22:26:53

    For your own vid / pid combonation i think you will be fine when recompiling the micronucleus bootloader. You will have to make two adjustments.
    1. The usbconfig.h – https://github.com/Bluebie/micronucleus-t85/blob/master/firmware/usbconfig.h
    2. The micronuclues_bootloader.inf (if you are using the windows driver )

    Maybe there is further tweaking needed in the boards.txt of the arduino ide – but i am not sure about this.

    Reply

  2. oggstreamer
    Oct 28, 2013 @ 12:37:43

    in that case I suggest you to recompile the micronucleus commandline application. tweak the values in micronucleus_lib.h (https://github.com/Bluebie/micronucleus-t85/blob/master/commandline/library/micronucleus_lib.h)

    recompile the application and replace the executable

    Reply

  3. karme
    Nov 14, 2013 @ 02:16:23

    Looks like one has to add a washer – otherwise the distance to the 3 capacitors is to small?

    Reply

  4. karme
    Nov 14, 2013 @ 12:28:59

    looking at the picture again I see i got metal nuts where the picture shows plastic nuts? did you change that?

    Reply

    • OLIMEX Ltd
      Nov 14, 2013 @ 12:35:21

      yes, we replaced the plastic with metal, but the picture is not changed

      Reply

      • Jens Thiele
        Jul 23, 2014 @ 22:39:44

        The shop still shows the old description. Another thing that surprised me just now: the typical? SATA disk won’t fit in between the two plates / you can only mount the disk at the bottom because it will be too high. Maybe you should ship with different screws?

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: