A10-OLinuXino-LIME-UEXT is adapter board with Male connector on 0.05″ which can connect to A10-OLinuXino-LIME GPIOs with 0.05″ step ribbon CABLE-40-40-10CM and allow LIME GPIOs to be used with BREADBOARD-1, or with A13-LCD43TS, A13-LCD7TS or A13-LCD10TS.
For the moment A20-LCD15.6 is not supported as LVDS signals got noisy when pass through A10-OLinuXino-LIME-UEXT but we are looking for solution.
UEXT signals can be used only when connected to GPIO1. On the other connectors UEXT signals will be not present.
olimex 
Jan 21, 2014 @ 15:37:14
I want to buy this board to connect the 10″ Olimex Touchscreen, but the description on the web shop says that you need a ‘LCD-CONN’ cable between this and the LCD display. Is this just a standard IDC-40 connector (CABLE-IDC40-15cm)?
When soldering my own cable I made a mistake because pin 1 is ‘bottom left’ in the normal IDC cable but on the lime it is the top left pin :(.This means that the top row and the bottom row need to be swapped in order to attach a cable. Does the board provide for this?
Jan 21, 2014 @ 15:38:54
Also: there is no ‘LCD-CONN’ in the web store, so that’s why I ask :). Is this board plus ‘CABLE-40-40-10CM’ enough to get the lcd with touchscreen up and running?
Jan 21, 2014 @ 23:49:57
LCD_CON is the GPIO pin connector on the LIME itself 😉 Check here:
Click to access A10_Lime_GPIOs.pdf
Jan 22, 2014 @ 02:22:04
Ah ok, so I only need the 0.05″ header cable, this board and the A13-compatible 0.1″ header cable :). Thanks.