MPIDE Arduino like IDE for PIC32-Pinguino and Duinomite boards


Image

With this tutorial video below we will show you how to setup MPIDE Arduino like IDE to work with PIC32-PINGUINO, PIC32-PINGUINO-OTG, PIC32-PINGUINO-MICRO, DUINOMITE, DUINOMITE-MINI, DUINOMITE-MEGA, DUINOMITE-eMEGA.

Here is video tutorial how to install MPIDE and add support for Pinguino and Duinomite boards:

MPIDE installation is also described in our Wiki

Why to use MPIDE?

It’s an alternative to Pinguino IDE and Duinomite Basic. You have one more option to use these boards.

Pinguino IDE  ( pinguino.cc ) was made as parallel project to Arduino but for PIC microcontrollers, instead of Java it uses Python for the IDE, with the latest Oracle – Google lawsuit we still wonder if Java was the best choice for Arduino IDE, but nevertheless Arduino was made earlier and managed to attract huge community. Pinguino community is still small and the demo codes for Pinguino are not so many as for Arduino.

Microchip and Digilent financed the release of MPIDE which is pure Arduino IDE fork and thus more familiar for the Arduino community to use. As MPIDE already have good PIC32 support it was very easy to add support for PIC32-Pinguino and Duinomite there.

Why to use MPIDE and C for Duinomite?

Duinomite boards are low cost but powerful boards initially made specially for project named Maximite.
Two years ago we found interesting project which makes Basic computer with just PIC32 processor.
I started with Apple ][ so it was very nostalgic to see BASIC computer made with embedded processor and to control GPIOs and resources in BASIC.

At that time Maximite was advertised as “open source” project, i.e. firmware sources were available for download. The hardware schematic also was present in JPEG format.

As hardware engineers we immediately spotted some weakness in the Maximite hardware design – the author being mostly software engineer omitted lot of hardware features PIC32 have.

While PIC32 have ultra low power modes, hardware SPI, I2C, UARTs, parallel interfaces which could work with MHz clock speed, for some weird reason the Maximite author decided to implement them by bit-banging purely in software – cripple-ing these interfaces to very low speeds only. Low power modes were not implemented at all.

So we decided to improve the hardware – this is how we made our board with low power design, hardware UARTs and SPIs, UEXT and Arduino connectors so Arduino shields like Gameduino etc could be placed on top of the board and so on.

We completed our hardware design and we proudly offered the Maximite author to check it and tell us his opinion … but he told us that he is not interested and demanded us to choose different name than Maximite. It was a quite surprising open source project author to refuse contribution. So we named our board Duinomite (Maximite is also explosive so we wanted to show where our board roots are).

Being mostly Hardware company we couldn’t implement the software our self, so we contacted Ken Seggler who at this time made port of Maximite for ChipKit board with same PIC32 processor. He was unemployed at that time and he accepted to make the port and even to implement our new ideas we had about low power sleep modes, the new hardware UART and SPI, SETUP command for general board setup, Gameduino commands, we discussed on public forum how to implement editor inside the BASIC and label-less commands etc.

Unfortunately this move really pissed off the Maximite author. He saw the Maximite BASIC port to our board as direct competition as now our hardware had more features than his own.

He closed the Maximite Basic source, then wrote one nasty page about Duinomite on his web presenting him as victim of the big bad company who steal his work and removed his name out of it.
From day one Duinomite Basic fork is on GitHub and anyone can check how true these blames are – Maximite author’s name have been always on our Duinomite Basic fork and display on startup . We had to fork his BASIC just because he refused to support our hardware.

Meantime Ken found full time job and couldn’t contribute to the project anymore, the Maximite author released new version of Maixmite Basic with label-less commands, build-in editor and his new Maximite hardware has … Arduino connectors  (surprise surprise🙂 ), so after all he has listened to us and took our contributions silently back !

Duinomite software left at that stage as no one was interested to duplicate Maximite Basic work and to run in parallel two same language implementations. The Maximite author had one problem though – while Duinomite quality build hardware cost just EUR 20 the Maximite less capable hardware in kit form cost was something like x3 times more and obviously people were buying Duinomite hardware, so to increase his followers he made Duinomite support and offered HEX compiled version of his Maximite BASIC for Duinomite – actually doing what we originally asked him for to do!

As far for the Duinomite BASIC fork – none of the younger and capable developers is interested in BASIC. Most of Maximite / Duinomite BASIC users are 40+ years and just users but not contributors / developers, so Duinomite BASIC development is pretty much dead.

Although Duinomite boards are still high seller, I guess 99% of people buy them and use them as regular PIC32 development board and use C instead of Basic judging from the tech supports questions we get.

Now with MPIDE Arduino like IDE people who are familiar with Arduino can develop on Duinomite too.

4 Comments (+add yours?)

  1. Trackback: .NET i jiné ... : Odkazy z prohlížeče – 9.6.2014
  2. angelo
    Jun 11, 2014 @ 12:13:02

    Is there any chance to get the Pinguino Mx-220 to work on Mac?
    MX-220 does not show up as a COM port on Mac… It would be great!

    Reply

  3. Brian Schmalz
    Mar 21, 2015 @ 16:47:08

    Note that Microchip didn’t actually fund MPIDE development. The little band of open source developers that put in their own time into the project got MPIDE running, and only recently has Microchip put some marketing money into helping get certain features done, or promoting it at events.

    Reply

  4. Henrik
    Oct 10, 2015 @ 22:09:47

    Is there a way to get it to work with duinomite mini? I only see mega.

    Reply

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: