A10-OLinuXino-LIME Debian Build with Kernel 3.4.90+



A while ago we put on our Forum wishlist for the next Debian release, now in this Debian release we implemented most of the requests we read on the forum.

Here is Debian image for A10-OLinuXino-LIME with Kernel 3.4.90+

Here is Building description.

Here is List of installed packages.

Here is image description.

18 Comments (+add yours?)

  1. shug
    Jun 23, 2014 @ 17:43:16

    what about A20 ?


  2. mexchip
    Jun 23, 2014 @ 20:02:49

    I can’t access list of installed packages


  3. Arthur Plank
    Jun 24, 2014 @ 14:22:31

    The image description talks of the A20


  4. Arthur Plank
    Jun 24, 2014 @ 14:23:29

    The above says “Here is Debian image for A13-OLinuXino-LIME with Kernel 3.4.90+”, but the text is for A10


  5. Arthur Plank
    Jun 24, 2014 @ 17:44:37

    It is a shame that zerofree was not used on the partition in the image before posting. It would have reduced the size of the 7z fine by about 60%


  6. MiPnamic Von Wirklichkeit
    Jul 05, 2014 @ 23:11:43

    The Building description link is broken


  7. Daniel
    Jul 20, 2014 @ 04:44:30

    Good stuff, but why didn’t you compile support for USB sound cards into the kernel? Since it has no audio connectors, and USB sound cards can provide better sound quality than the A10, it would be very useful to have this support out of the box. This would allow for cheap internet radios and stuff like that.

    I’m trying to compile a kernel now, but it would be nice to see this as a standard feature in future distributions. Maybe you could also provide a kernel with USB sound card support for the a10_Lime_debian_3.4.90_release_3.img.7z?


  8. Trackback: How to create bare minimum Debian Wheezy rootfs from scratch | olimex
  9. Michael Balcos
    Aug 18, 2014 @ 15:46:45

    Using this and other blog posts in this site, I was able to document a way to setup Slackware ARM 14.1 on the OLinuXino A10 Lime: http://www.malaya-digital.org/setting-up-slackware-arm-14-1-on-the-olinuxino-a10-lime-from-scratch/


  10. Dex
    Oct 07, 2014 @ 19:09:37

    Iptables doesn’t work


  11. Kostya
    Mar 05, 2015 @ 19:30:12

    No work! The method does not work! Overdue key http://www.emdebian.org/debian. Depending not collected. Author of the request, check the material and describe ways around 🙂


  12. Mateusz Baran
    May 22, 2015 @ 20:34:46

    Hi 🙂
    As Kostya sayd the emdebian toolchain don’t work. I use crosstoolchain instead it with gcc-4.9, but when i try to compile uImage i get this error:

    /home/mateusz/a10_kernel/linux-sunxi/arch/arm/plat-sunxi/pm/standby/Makefile:22: recipe for target ‘arch/arm/plat-sunxi/pm/standby/standby.elf’ failed
    make[3]: *** [arch/arm/plat-sunxi/pm/standby/standby.elf] Error 1
    /home/mateusz/a10_kernel/linux-sunxi/arch/arm/plat-sunxi/pm/Makefile:8: recipe for target ‘arch/arm/plat-sunxi/pm/standby/standby.bin’ failed
    make[2]: *** [arch/arm/plat-sunxi/pm/standby/standby.bin] Error 2
    scripts/Makefile.build:443: recipe for target ‘arch/arm/plat-sunxi/pm’ failed
    make[1]: *** [arch/arm/plat-sunxi/pm] Error 2
    Makefile:947: recipe for target ‘arch/arm/plat-sunxi’ failed
    make: *** [arch/arm/plat-sunxi] Error 2
    make: *** Waiting for unfinished jobs.

    Any solution for this?


  13. Alexandre Skrzyniarz
    Jun 05, 2017 @ 10:28:28

    Looks like the links are currently down.


  14. winfried
    Aug 19, 2017 @ 14:08:02


  15. Jetro
    May 02, 2018 @ 18:44:16

    The link is not working yet!


Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

%d bloggers like this: