PIC32-HMZ144 is low cost development board for the new PIC32MZ2048HCM144 processor from Microchip with these features:
- PIC32MZ2048EHC144 512KB RAM 2MB Flash
- USB-OTG
- uSD card
- ICSP for debug and programming
- JTAG pins exposed on 0.1″ step 6 pins
- EXT1 and EXT2 50 pin 0.1″ connectors for all PIC ports
- RESET and USER buttons
- PWR and STATUS LEDs
- LiPo battery charger and connector
- UEXT connector
- Dimensions: 77 x 52 mm
PIC32MZ2048HCM144 is high performance MIPS core processor from Microchip with 10-bit, 500 KSPS, 48-channel ADC module, MMU for real time OS support, CAN, UART, I2C, PMP, EBI, SQI & Analog Comparators, SPI/I2S interfaces for audio processing and playback, Hi-Speed USB 2.0 Device/Host/OTG, 10/100 Mbps Ethernet MAC with MII and RMII interface.
Another board with Ethernet and LCD is on the way, PIC32MZ2048 is good candidate to run RetroBSD
Feb 21, 2015 @ 02:26:56
Out of stock…
Feb 21, 2015 @ 18:53:51
Maybe they have forgotten to add the stock quantity in the shop initially, it is there and in stock now 😉
P.S. Olimex, please put links to the webshop in your new product posts 🙂
Feb 23, 2015 @ 10:51:21
+1 to the request for link to the product page
Feb 24, 2015 @ 15:00:03
Hah, maybe I should have included the link in my previous post 😀
https://www.olimex.com/Products/PIC/Development/PIC32-HMZ144/open-source-hardware
Feb 21, 2015 @ 03:07:52
the chineese new year has come and olimex throws out one new board after another! The revenge of the bulgarians 😉 😉 😉
Keep it up!
P.S. Happy sheep year
Feb 23, 2015 @ 21:24:45
PIC32MZ2048EHC144 – did you mean PIC32MZ2048ECH144 ? [Typo]
Mar 01, 2015 @ 18:51:08
perfect.
Mar 03, 2015 @ 09:59:11
Lurch asked — did you mean PIC32MZ2048ECH144 ? Mine arrived with an xxxECG144 which means no CAN, fewer DMA channels, but otherwise the same. No problem in my case but I suppose the product description should be corrected.
Mar 03, 2015 @ 14:13:15
Write to support@olimex.com ; Today is a national holiday but I guess they will answer the next days.
Mar 11, 2015 @ 20:13:33
Hi Dear Guys,
I got one of these board and the pic are ECG not ECH, the problem was we need to work on CANBUS, pls update the product specs or change the MCU on the board,
Thanks,
Mike
Mar 16, 2015 @ 08:27:34
This is an open question here to Tsevan or other guys that can deliver insteresting opinions about that matter.
I see also the errata on MZ devices, pull-ups on OSC2, etc…. only certified 12 or 8Mhz… etc….
I think the MEBII board uses MEMS OSC and we are developing custom hardware now, based on these device series MZ.
It’s the first time we will go to implemment MEMS OSC type instead of crystals, the costs are near the same but what are real differences between the two systems??
We are from old school and know crystals working from years, but on this case seems the OSC circuit implementation on MZ series are on the errata and will go to try to implement MEMS to avoid issues.
What do you think about these type of oscillators ?? seems are replacing quartz, on some designs…..
The ppm’s seems less stable….
Maybe another option will be to generate OSC1 signal with small microcontroller stable circuit, to the MZ……
Cheers,,,,
Mike