MOD-OLED-128×64 is low cost, low power, high contrast LCD display with UEXT connector which allow to be used with any of our OLinuXino and Arduino boards.
The LCD panel control is done via I2C thus only 4 wires are necessary Vcc 3.3V, GND, SCL and SDA.
The power supply required is only 1 uA in sleep mode, 200 uA in operating mode and 7mA in display ON mode.
View area is 21 x 11 mm.
MOD-OLED-128×64 can be used on Breadboard too. For this purpose 4 pin header is provided which could be soldered on the back of the board.
KiCAD files are on GitHub, Python code to work with any of our OLinuXino Linux board is provided, also code for Arduino.