SNS-TMP10K is low cost preciese temperature sensor with NTC thermistor. It have 10K +-1% resistance by 25C and the resistance decreases with the temperature rise i.e. it have negative temperature coefficient.
SNS-TMP10K is encapsulated in metal can with dimensions 25 x 5 mm and comes with 60 cm cable with JST 2 mm connector crimped to the wires.
The temperature coefficient B for this thermistor is 3435 and it’s very easy to measure the temperature with Arduino.
SNS-TMP10K is good for measuring temperatures in range -30+110C, as it’s encapsulated and filled with epoxy resin it’s good both to measure air and fluids like water etc.
Sep 25, 2015 @ 10:05:20
Can i connect directly to duino? Thanks
Sep 25, 2015 @ 11:13:55
The provided *uino example has electrical schematic (in the form of ASCII art) that contains only one 10K resistor besides the sensor itself to connect it to the MCU board.
Sep 27, 2015 @ 12:54:33
110°C for epoxy resin looks pretty high?