TERES I assembly workshop this Saturday!


workshop

This Saturday 21st of October we will have TERES I assembly workshop!

Customers from Bulgaria who placed orders for TERES I DIY Open Source laptop will have their laptop kits ready and are invited to come and we assembly them together!

The assembly workshop will be in OLIMEX Training Building and will start at 14.00 o’clock.

No need to have Laptop kit to participate, everyone is welcome to join us.

18 Comments (+add yours?)

  1. Fred
    Oct 18, 2017 @ 19:46:54

    Any streaming option available for foreigners? Would be great ! 😉

    Reply

  2. Bobby
    Oct 22, 2017 @ 17:18:43

    You could also make a video assembling the Teres laptop and upload it to youtube.

    Reply

  3. kyrk
    Oct 23, 2017 @ 14:29:02

    What is about ESD protected workplace?

    Reply

  4. blu
    Oct 31, 2017 @ 02:24:04

    Today I received and assembled mine. One Teres-A64 happily charging at the kitchen plot ; ] Its assembly was a good exercise! I’ll try to attend the next assembly workshop, though, as I have some ideas for the next model ; )

    Reply

    • OLIMEX Ltd
      Oct 31, 2017 @ 07:54:05

      no need to wait with the ideas just email us 🙂

      Reply

      • NP32
        Oct 31, 2017 @ 16:46:09

        Good news that the laptop starts to arrive. What is the status of shipping orders in general? Did olimex start shipping abroad, how many orders have been shipped?

        Is it a commercial secret, how large is the first run, and how many orders were placed?

      • OLIMEX Ltd
        Nov 01, 2017 @ 11:56:36

        we will ship all pending orders in a week, sorry but we do not share marketing info

  5. Balint Szente
    Nov 01, 2017 @ 09:50:42

    @NP32: I placed the order two weeks ago and Monday I received the tracking number. I’m from Romania. So I’m looking forward ta assemble it 😀

    Reply

  6. NP32
    Nov 01, 2017 @ 12:58:38

    @Balint Szente I ordered on the day of the announcement, like 3 weeks ago, and I received the shipping notification today.

    Reply

  7. NP32
    Nov 02, 2017 @ 20:27:24

    I received the laptop, and I am pretty satisfied. A few questions/comments:

    * what do I do with the magnet lid sensor?
    * the antenna cable looks long, but it is easy to place it so that the cable does not reach the connector. I had to reopen the lid and re-glue the antenna a bit closer.
    * the 17th m2x4 bolt, probably, goes in the very middle of the bottom panel, from the outside.

    Reply

    • NP32
      Nov 02, 2017 @ 20:40:57

      P.S.: I found where the magnet goes. Please, write some something about it in the instructions 🙂 It is on one of the photos, but I missed it, and had to open the lid once again.

      Reply

      • Balint Szente
        Nov 03, 2017 @ 13:13:55

        @NP32: yes, it happened to me as well with the little magnet.

        On the other hand, I like the laptop, the plastics are of good quality and it is pretty solid.

  8. NP32
    Nov 02, 2017 @ 21:40:32

    Another question: I would like to charge the laptop from the USB. The adapter is bulky, plus, depending on the country, one needs additional bulky adapters. Meanwhile, USB sockets are everywhere, e.g. in cars or airplanes.

    What is the size of the power barrel connector? If I get a USB->barrel cable, would the charging work from usual USB chargers which supply 0.5A to 3A?

    Reply

  9. Olov
    Nov 03, 2017 @ 07:49:24

    What page did you see the magnet?

    Reply

  10. NP32
    Nov 03, 2017 @ 12:49:54

    The photo of the lid cover, when the hinges are installed, but the lcd is not.

    Reply

  11. NP32
    Nov 03, 2017 @ 13:12:55

    Another thing: when the lid is closed, it presses on the keyboard. This is an issue if the laptop is not suspended. Probably, it is not so hard to solve this in the software. What is the right way to turn off the keyboard and the touchpad on the event of closing the lid?

    Reply

    • SK
      Nov 03, 2017 @ 13:52:16

      Have you installed the 2 small rubber feet on top of the screen screws?

      Reply

      • NP32
        Nov 04, 2017 @ 13:17:46

        yeap. The keys which are pressed by the lid are in the top row, like Esc or Del. They are only pressed when I carry the laptop around, probably because the lid flexes slightly.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

w

Connecting to %s

%d bloggers like this: