PWR-SWITCH is optically isolated EU style power load switch for up to 3500W, 230VAC/16A and can be driven with any microcontroller, Arduino, EPS32, or Linux computers directly with 3-24V

PWR-SWITCH hides the high voltage problems from the Arduino, ESP32, Raspberry Pi, Beaglebone, OLinuXino developers. It has 1500VAC optically isolation and can drive high voltage up to 230VAC / 16A loads safely.

To switch On or Off the loads from 3 to 24VDC can be used, so you can drive the loads with any microcontroller only 1mA is necessary to trigger the switch.

PWR-SWITCH is with EU stype plug and receptacle, so to use it in US or in UK you will need some of these:US to EU adapter, EU to US adapter or UK to EU adapter.

 PWR-SWITCH has CE-EMC and LVD certification.

Green LED show the switch status.

USB-ISO USB 2.0 Full Speed insulator passed all EMC tests in certified laboratory and now can bear CE mark!

After our first product which pass CE requirements (ESP32-POE-ISO) now we are happy to announce that we have second product which pass CE standard tests.

USB-ISO have been tested and passed these standards tests in certified laboratory:

• EN 55032:2015
• EN 55035: 2017
• EN 61000-3-2: 2014
• EN 61000-3-3: 2013

So it can be now CE marked.

 

ESP32-POE-ISO passed RED,EMC, Helth and Safety tests necessary for issue of CE marking

We are proud to announce that ESP32-PoE-ISO board has passed successfully all necessary tests to bear CE marking:

• EN 62311:2008 RED Health
• EN 62479:2010 RED Health
• EN 301 489-1 V2.2.1 (2019-03) RED EMC
• EN 301 489-17 V3.2.0 (2017-03) RED EMC
• ETSI EN 300 328 V2.1.1 (2016-11) WIFI-2.4GHz band radio test
• EN 300 328 V2.1.1 (2016-11) BLE radio test
• IEC 62368-1:2014 Safety

ESP32-EVB, ESP32-GATEWAY, ESP32-DevKit-Lipo, ESP32-POE are also going to be tested.