New Open Source Hardware board released: BB-TB6612 Dual DC motor controller with PWM to drive small robot cars with 12V up to 1.2A motors

BB-TB6612b

BB-TB6612 is dual channel DC motor controller board it is nice add on for the Robot chassis we have ROBOT-2WD-KIT , ROBOT-2WD-KIT2 , ROBOT-2WDL-KIT , ROBOT-3-WHEEL-KIT and can drive these gear motors: MG-6-120 , MG-6-48  and MG-6V-1:380

The digital logic can be from 2.7 up to 5.5V. The motor voltage can be from 2.5 up to 13.5V.

PWM, CW, CCW, brake-stop, stand-by modes are implemented.

 

Gear motors and accessories for building robot cars are in stock

MG-12V-DE5

We got some new toys in stock for robot builders. The MG-12V-1:100-DE and MG12V-1:380-DE are gear motors for robot cars, working at 12V with 78 RPM and 300 RPM . Both have digital encoders which give two channel feedback for the rotation speed, used for identifying the speed and rotation direction. The MG-12V-1:100 and MG-12V-1:380 are lower cost alternatives to those motors but without encoders.

These motors can be attached to a flat surface with MG-FIX.

MG-FIX

The MG-WHEEL-43mm are rubber wheels with diameter 43mm and a width 19 mm which attach directly to MG-6V and MG-12V gear motors.

MG-WHEEL-43mmb

The MG-WHEEL-65mm is rubber wheel with diameter 65mm and width 25mm. It requires a special MG-COUPLER.

MG-WHEEL-65mmd