Robot parts in stock: Heavy Duty Servo, Brackets, Drag Chain, 8mm Linear guide, bushing and fixers.

MS-9.5-55

MS-9.5-55-MG is heavy duty metal gears 9.5 kg.cm servo motor 0-180 degrees for Arduino projects.

MS-DISK-20mmb

MS-DISK-20MM is aluminum disk which allow MS-9.5-55-MG servo to be connected to MS-BRACKET, MS-BRACKET-U, MS-BRACKET-W and MS-BRACKET-L and allow complex combination with different degrees of freedom.

DRAG

DRAG-CHAIN-10×10 and DRAG-CHAIN-7×7 are plastic wire guide for CNC X-Y tables.

HSS-8-500mm

HSS-8-500MM is surface hardened Stainless Steel linear guide which is with 8 mm diameter and cut to 500 mm length. It’s essential part of every CNC project and can be used with SUPPORT-SHF8 , SUPPORT-SK8, 608ZZ , KFL08, KP08 , SC8UU bearing, BUSHING-15×12-8 and FIX-RING-8.

 

 

TERES-I USB debug cable

TERES-USB-DEBUG

TERES-USB-DEBUG cable is now in stock. TERES has unique features to multiplex audio port between audio headphone output and serial console debug.

There are two ways to enable the serial debug via audio jack. First one is with teres1-debug on|off script and it will work until reboot:

sudo teres1-debug on

when you want to stop use

sudo teres1-debug off

this is good for try something while your laptop is working, but if you want to catch the early uboot messages you have to use another script:

sudo debug-switch.sh on

this will switch debug serial port permanently to audio jack until you execute the scriupt

sudo debug-switch.sh off

These scripts are included in the official image, but if you build your own you can install them from the GitHub sources

New Product in stock: Professional ECG 3-WAY cable with snap connection for Gel filled electrodes

Image

ECG-PRO-3-WAY-CABLE is professional ECG cable with snap connector for ECG-GEL-ELECTRODE GEL filled electrodes:

Image

The GEL filled electrodes ensure perfect low resistance skin connection which reduces the noise when capture the bio signals.

Based on the ECG-PRO-3-WAY-CABLE we made new SHIELD-EKG-EMG-PRO cable which can be plug to the popular SHIELD-EKG-EMG and use GEL filled electrodes for better signal / noise ratio.

Image

New Product in stock: Ribbon cable with 40 pin 0.05″ step connectors for LIME GPIOs

Image

CABLE-40-40-10CM is ribbon cable with two 40 pins 0.05″ step connectors and length 10 cm. Can be used for LIME GPIOs.

New Product in stock: SATA-CABLE-SET for A20-OLinuXino

Image

SATA-CABLE-SET is specially made cable for connecting 2.5″ SATA drives to A20-OLinuXino it consist of SATA sata cable and SATA-PWR cable which have special JST connector for A20-OLinuXino SATA power connector, the length is matched to connect trouble free. Here is picture of A20-OLinuXino with 2.5″ SATA HDD 320GB and SATA-CABLE-SET put in A20-ENC:

Image

Image