Robot parts in stock: Heavy Duty Servo, Brackets, Drag Chain, 8mm Linear guide, bushing and fixers.

MS-9.5-55-MG is heavy duty metal gears 9.5 kg.cm servo motor 0-180 degrees for Arduino projects.

MS-DISK-20MM is aluminum disk which allow MS-9.5-55-MG servo to be connected to MS-BRACKET, MS-BRACKET-U, MS-BRACKET-W and MS-BRACKET-L and allow complex combination with different degrees of freedom.

DRAG-CHAIN-10×10 and DRAG-CHAIN-7×7 are plastic wire guide for CNC X-Y tables.

HSS-8-500MM is surface hardened Stainless Steel linear guide which is with 8 mm diameter and cut to 500 mm length. It’s essential part of every CNC project and can be used with SUPPORT-SHF8 , SUPPORT-SK8, 608ZZ , KFL08, KP08 , SC8UU bearing, BUSHING-15×12-8 and FIX-RING-8.

 

 

Lot of Robot and CNC parts are now in stock stocked.

We needed these for our own projects development, but decided that other may need these in small quantities as well, so decided to stock:

Linear Guides,

Bearings,

Stepper Motors,

Couplers,

Shaft supports

Incredible 6 parts CNC plotter

Jay made the smallest CNC plotter made by Laser cut parts which according to his blog cost about $20 to re-produce, this is really amazing piece of engineering:

http://plotterbot.com/2013/11/how-to-build-a-tiny-cnc-drawing-robot/

I do wonder if something similar could be adapted for solder paste syringe and to make small solder paste spit machine which to eliminate the need for stencils for prototype runs.