USB-gLINK – Industrial Grade Open Source Hardware LTE cat 4 module for IoT with Navigation and LiPo battery support is in stock!

gLINK

USB-gLINK is Open Source Hardware Industrial grade -25+85ºC LTE cat 4 module optimized for IoT applications with integrated LiPo Battery power supply charger and Navigation. USB-gLINK operate on all GSM frequencies with 2G 3G 4G/LTE protocols, so you can use it worldwide.

USB-gLINK will work with OLinuXino OSHW Linux Computers, Beaglebone and Raspberry Pi and any other PC running Windows, Linux or Android.

The LTE speed is 150Mbps downlink and 50Mbps uplink, but is backward-compatible with existing EDGE and GSM/GPRS networks. This allows USB-gLINK to connect to any existing 2G, 3G and 4G network.

Inside USB-gLINK there is build in navigation which supports: GPS, GLONASS, BeiDou/Compass, Galileo and QZSS.

The networking supported protocols are : TCP / UDP / PPP / FTP / HTTP / NTP / PING / QMI / NITZ / SMTP / MQTT / CMUX / HTTPS / FTPS / SMTPS / SSL / MMS / FILE.

USB-gLINK can operate on these bands: B1 / B2 / B3 / B4 / B5 / B7 / B8 / B12 / B13 / B18 / B19 / B20 / B25 / B26 / B28 / B38 / B39 / B40 / B41, which covers every mobile operator anywhere in the world. This allow your solution based on USB-gLINK to be sold globally without hardware changes.

There are number of carriers who already approved the module used in USB-gLINK: Deutsche Telekom (Europe), Verizon/AT&T/Sprint/U.S. Cellular/T-Mobile (North America), Telus/Rogers (Canada)

These regulatory are passed: GCF (Global), CE (Europe), FCC/PTCRB (North America), IC (Canada), Anatel (Brazil), IFETEL (Mexico), SRRC/CCC/NAL (China), KC (South Korea), NCC (Taiwan, China), JATE/TELEC (Japan), RCM (Australia & New Zealand), FAC (Russia), NBTC (Thailand), IMDA (Singapore), ICASA (South Africa)

New Product in Stock: MOD-HMC5883L Digital compass with UEXT connector

Image

MOD-HMC5883L is new Open Source Digital Compass breakboard. It comes with UEXT connector and cable so you can connect it to any of our development boards which have UEXT connector, but if you want you can use it also with breadboard as all HMC5883L signals are available in two rows at 0.1″ step on the two sides of the PCB.

MOD-HMC5883L is with 12 bit precise ADC and allow you to measure north with 1-2 degree error.

The board is in stock and cost EUR 9.95

Demo code for OLinuXino in C and Python and for Arduino, MAPLE, Pinguino will be available on our web, the Eagle CAD files and schematic is also there.