3D enclosures for OLinuXino on thingiverse.com

Simon Lopez sent me e-mail that he made nice 3D enclosure for A13-OLinuXino @ thingiverse.com

http://www.thingiverse.com/thing:146986

Searching for OLinuXino there I found two more enclosures. One made for imx233-OLinuXino-MICRO:

and one made for imx233-OLinuXino-MAXI:  http://www.thingiverse.com/thing:31272

A20-ENC, OLIMEXINO-85-KIT and OLIMEXINO-85-ASM are in stock!

A20-ENC the plastic enclosure for A20-OLinuXino-MICRO is now in stock, the pictures on the web page show how to be assembled.

OLIMEXINO-85-KIT and OLIMEXINO-85-ASM are also in stock now. We still work on the assembly instruction and it will be ready and uploaded by the end of the day.

With OLIMEXINO-85-KIT we offer for very first time development board in KIT form. This is something new for us, it brings also new experience for the customer: to DO-IT-YOURSELF and to have the pleasure to see how something you build yourself start working.

I still do remember how proud I was when I was 12 and build my first radio and it worked! I hope you will have the same pleasant experience building your first Arduino with OLIMEXINO-85-KIT.

For the moment we use Digispark VID/PID and Arduino modified IDE, as this is the only out of the box working solution for ATTiny85. We have our own USB VID/PID and we are going to replace the Digispark one as soon as we figure out how to do this. If someone want to help on this we will have nice present for the efforts she/he will do 🙂

A20-OLinuXino Laser Cut plastic enclosure

People keep asking us if A20-OLinuXino have plastic enclosure.

I have to admit that when we designed it we didn’t though for enclosure as our target was to make development board where everything is open for access.

Today we laser cut two plates on top and bottom of A20-OLinuXino, it’s hard to call them “enclosure” but they will protect OLinuXino from accedently droping metal parts on it which to cause shorts.

It consist of two plexyglass plates, four M3 screws and 8 plastic washers which assembly together.

on back you can see there are four additional holes where you can screw 2.5″ SATA HDD

SATA sets of cables which plugs directly to SATA 2.5″HDD and OLinuXino’s SATA and SATA PWR connector will be available next week.

We will add the A20-ENC to our web shop next week, the price will be around EUR 4.00