New Open Source Hardware IoT ESP32-S2 development boards with LiPo Battery Charger and consumption of only 30uA in deep sleep target handheld WiFi apps

ESP32-S2 is new SOC from Espressif which fills the gap between ESP32 and ESP8266.

It has the same memory model as ESP32 but has cut the Ethernet and Bluetooth parts, so only WiFi connection is possible – same as ESP8266, but offers more power, secure boot and encrypted firmware. Also support of decent SSL connection, something which lacks in ESP8266.

Pricewise now S2 is a bit lower cost than ESP32 and more expensive than ESP8266, but there is very strong competition in this niche coming from the new Bouffalo BL6XX chips, so my prediction is that to stay ahead Espressif will further lower the prices of ESP32-S2 to match ESP8266 very soon.

For comparison with ESP32 and ESP8266 the new ESP32-S2 has plenty of GPIOs up to 43!

Initially Espressif has announced that their ESP32-S2-WROVER modules will have as low as 2-4uA consumption, but later they increased this value to 20uA. Not quite well as their target but still very good achievement.

Our ESP32-S2-DevKit-Lipo is pin to pin compatible with ESP32-S2-Saola-1:

To keep compatibility with SAOLA-1 we add RGB LED, but also add LiPo battery charger and ESP32-S2-DevKit-Lipo can operate even without external power supply only on LiPo battery, there is battery level monitoring and external power supply sense. ESP32-S2-DevKit-Lipo can power external circuits with 3.3V up to 200mA when operate on battery.

ESP32-S2-DevKit-Lipo has build in programmer with CH340T. There is possibility the programmer part to be excluded and to use ESP32-S2 directy USB connection.

When operating on battery if the RGB LED is enabled the power consumption is ridiculous 700uA as the RGB LED appear to use lot of current even when not in operation, but there is RGB disable solder jumper which if opened you will not be able to operate the RGB LED on battery but will decrease the power consumption to total less 30uA in deep sleep.

For these who need more memory there is variant ESP32-S2-WROVER-DevKit-Lipo with 2MB of PSRAM.

The prices start from EUR 5.56 for ESP32-S2-DevKit-Lipo and EUR 6.36 for ESP32-S2-WROVER-DevKit-Lipo .

ESP32-WROOM-32 WiFi/Bluetooth module is in stock!

esp32-wroom32-1

ESP32-WROOM-32 modules are in stock now!

Again these are from the very first lot and with limited supply. To give chances to more developers to try them we will not allow more than 3 modules per order.

This module is good only if you develop your own board. For these who are not good with the soldering iron and SMD components soldering our advice is to wait for new supply of ESP32-CoreBoards or our own ESP32-EVB which will come with two Relays, Two buttons, SD-card connector, Ethernet 100Mbit and all signals on prototyping friendly 0.1″ step connectors.

Thanks for all who posted tips on our blog about ESP32-EVB feature wishlist!

EDIT: there was question on Twitter if these are original Espressif parts and why there is no FCC/CE markinig, my guess is that the certification is not complete, as it’s in the datasheet but not on module body. The modules come directly from Espressif, as you can see from reel label they are manufactured October 15th 2016 and one week later are in our stock for sale 🙂

esp32