Gear motors and accessories for building robot cars are in stock

We got some new toys in stock for robot builders. The MG-12V-1:100-DE and MG12V-1:380-DE are gear motors for robot cars, working at 12V with 78 RPM and 300 RPM . Both have digital encoders which give two channel feedback for the rotation speed, used for identifying the speed and rotation direction. The MG-12V-1:100 and MG-12V-1:380 are lower cost alternatives to those motors but without encoders.

These motors can be attached to a flat surface with MG-FIX.

The MG-WHEEL-43mm are rubber wheels with diameter 43mm and a width 19 mm which attach directly to MG-6V and MG-12V gear motors.

The MG-WHEEL-65mm is rubber wheel with diameter 65mm and width 25mm. It requires a special MG-COUPLER.

 

New Robotics and CNC products in stock

We have now in stock many new Robotics and CNC components:

KITS:

ROBOT-2WDL-KIT Robot platform with two motors with wheels and encoders

ROBOT-LINE-FOLLOW Robot platform with analogue line follower

 

Micro motors:

MOTOR-200806 12000 rpm brush motor working at 3-6VDC

MOTOR-F1607 small drone motor with fan working on 3-6VDC and speed up to 50 000 rpm

VIBRATING-MOTOR-3X8 small vibrating motor only 3×8 mm size! you can use it to build small bug robot 🙂

 

Stepper motors:

SM-17HS4023 Stepper motor for CNC XY table or 3D printer 42x42x23mm

SM-42HB34F08AB Stepper motor for CNC XY table or 3D printer 42x42x34mm

SM-5VDC-DRV Stepper motor with 1:64 gear and driver!

SM-60SL Stepper motor with 48 mm screw

Robot hand:

ROBOT-GRIP Robot hand which works together with servo motor to open and close

Gear motors:

MG-12V-M4X55 Gear motor with M4x55mm screw can be used for small CNC table or Door lock/unlock mechanism.

MG-6V-1-380 Very compact Gear motor 6VDC 30 RPM can be used for blinder open, close

CARDAN-5X8 and CARDAN-5X5 Free joint for Boat fan or blinders open/close

Linear guides:

LINEAR-GUIDE-400MM Linear slide with 400 mm length

SCREW-T8X8-300MM Trapeziodal screw with brass nut 300 mm

Shaft support:

SK8, SK10

SHF8, SHF10, SHF12

Wide range of Micro Bearings

GT2 Pulleys and Belts:

Aluminum frame corners for 20×20 , 30×30 and 40×40 profiles:

 

Strong neodymium magnets 30x10x3 and 10x10x10:

New Products: Robot toy gear motors, wheels, chassis in stock!

We got new products in stock:

Gear Motors with 1:48 and 1:120 gear ratio, working on 6VDC:

65 mm x 25 mm wheels which couple to the gear motors above:

3-wheels and 4-wheels plexyglass chassis:

and of course battery holder which mounts to the chassis:

with these parts you can build complete 3-wheel chassis:

or 4-wheels chassis:

latter could be made with pair of high speed / lower torque and pair of low speed / higher torque  motors.

This is perfect moving platform for your next Arduino, Pinguino, Maple or OLinuXino project.