SMT-PROTOBOARD is something every developer must have 🙂 on it you can solder almost any SMT component and you have plenty of prototype area to check your ideas.
TQFP 32-44-52-64 on 0.8 mm step, TQFP 32-44-52-64-80-100 at 0.5 mm step, SOT23, SOT89, buttons, micro SD card, mini USB connector, JTAG, UEXT, 0402 0603 0805 TSSOP at 25 and 50 mils step
We use this board for our experiments when something should be check quick and dirty 🙂
And we now add OLinuXino paper Notebook and keychain to all our Quiz winners!
To participate in the Quiz is enough to re-tweet the Twitter Quiz announcement message.
To double your chances you have to answer the Quiz question
Here above is illustrative picture of our (yet in development) H3-OLinuXino-NANO with only 5 x 5 cm size. As you see the DDR3 memory need special routing with not only equal trace lines but also specific track impedance to be meet.
The Quiz question is what impedances are necessary for the tracks which route the DDR3 memory? Note there are two different impedances for the different lines. Quote them both 🙂
You have time to re-tweet and/or answer until Monday 16th of November.
In Monday we will post the correct answer and ask random.org to generate random number in range then announce the winner and ship the board by post/airmail.
Good Luck!
LIME-fan
Nov 14, 2015 @ 11:57:31
40Ohm and 60Ohm
aodhan145
Nov 15, 2015 @ 14:46:46
40Ohm and 50Ohm
sorin
Nov 20, 2015 @ 21:09:28
30 Ohm and 60 Ohm
Andreas Dannenberg
Jan 08, 2016 @ 08:40:40
You guys always do a fantastic job routing your boards… I’ve looked at quite a few of them. Even more so as it appears like that you are using good-old Eagle 🙂