RT1010-Py is our fastest board running MicroPython with Cortex-M7 @ 500Mhz i.e. about 4 times faster than RP2040-PICO

RT1010-Py is EUR 15.00 Open Source Hardware board based on MIMXRT1011DAE5A Cortex-M7 running at 500Mhz and have plenty of features:

• 128KB on board RAM
• 2MB SPI Flash
• three hardware UARTs
• two hardware SPIs
• two hardware I2C
• one I2S
• four PWM units with complementary outputs for push pull drivers
• USB 2.0 OTG
• micro SD card connector
• RTC with 32.768 kHz crystal
• RESET button
• BOOT buttonf
• UEXT connector with 3.3V, GND, I2C, SPI, and UART
• two GPIOs headers spaced at 22.86 mm (0.9”) with 15 digital and 5 analog GPIOs
• Dimensions: 53.34 x 25.4 mm ( 2.1 x 1”)

There is completely MicroPython support with software and hardware I2Cs and SPI2, onewire buttons etc.

RT1010Py-DevKit is EUR 10.00 Open Source Hardware mother board for RT1010-Py with these features :

• USB-C power supply connector
• two relays 250VAC/10A
• two UEXT connectors
• 4 position boot configuration slide switch
• status leds
• power and user buttons
• two connectors with all RT1010Py GPIOs access on 0.1″ step